The Ghost Immobiliser
Immobilisers are a powerful weapon in the fight against vehicle theft. They prevent the vehicle from starting if the does not have an identification card. They also work well to stop hotwiring or other traditional types of vehicle theft. However, newer methods like key cloning and relay theft are becoming more common.
The Ghost Immobiliser was designed to counter these trends and make your car inaccessible. It doesn't use LED indications, radio signals or key fobs and is silent and discreet.
Easy to install
The Ghost Immobiliser is an innovative device that connects to the CAN data network in your vehicle to stop key theft and cloning. It is a TASSA approved product, and insurance companies endorse it. It is virtually undetectable by thieves and operates in silence. It makes use of buttons on your steering wheel as well as the center console to generate unique pin-code codes that you must enter before you can start the vehicle. You can create up to 20 different sequences to provide greater security. The system is easy to install and doesn't require any additional hardware or wiring.
It is recommended to use an accredited CAN immobiliser installer that specialises in your specific vehicle type to ensure the most effective results. Idealy, they should have a workshop in your area where you can visit to have your installation completed. There is also a range of tools and materials that can help you with the installation. They will provide basic hand tools, multimeters, insulation tape and heat shrink tubing to safeguard the connections. A user manual will give you instructions for your vehicle's wiring.
Remove the battery prior to starting the installation process to avoid short circuits or airbag deployment. It is important to double-check the exact location of the CAN H and CAN L wires as the wrong identification could result in unintentional system integration. It is also a good idea to mark the wires using small bits of tape or mark them. Additionally, you can make use of a multimeter to confirm that the power source you have identified is able to provide a consistent 12V power supply.
Advanced thieves can use various methods to evade Ghost Immobilisers. This includes jamming or spoofing. These methods work by amplifying the signal that is transmitted from your key fob to the electronic control unit in your vehicle. With the help of advanced anti-jamming technologies and a constant monitoring, you can protect your vehicle from these sophisticated attacks.
Security enhancing
Ghost immobilisers provide an additional layer of security to protect your vehicle from theft. It has an PIN security system that is entered using buttons on your steering wheel or dashboard which makes it more difficult for thieves to take your car. The device is also designed to be hidden in your vehicle, without lights or other indicators that would signal a potential criminal to its presence. It is directly connected to the ECU of your vehicle via the data bus. This means that it is not vulnerable to relay attacks or hacking.
The system is a valuable investment for those who own prestige vehicles, as they are at a greater risk of theft due to their value and popularity. The enhanced features of the system protect your car from key copying and ECU swapping. Ghost immobilisers can be connected to an app, which means that you can easily arm and dearm them. They can also have a service/valet mode that allows you to temporarily deactivate them while your vehicle is being serviced or repaired.
Ghost immobilisers also have a excellent feature that it doesn't require any cutting of wire. This is a great feature, especially if are driving a car that doesn't have built-in immobiliser technology. Certain systems are capable of integrating with a GPS tracking device, providing additional security for your vehicle. Having a GPS tracker may also help to reduce your insurance premiums. If you choose to buy a ghost immobiliser, ensure that it is TASSA-verified and that an expert installer installs the device for you.
Compatibility with all major brands and models
The Ghost Immobiliser was designed to work with all major vehicle models and makes, securing your pride and joy from theft. It creates a unique pin code by pressing buttons on your steering wheel, console, or door panels. You must enter the code before you can drive. The system is tamper-proof and undetectable. It's also comes with a three-year guarantee. It is also fully endorsed by insurance providers. This means you can lower your insurance costs.
The Ghost system differs from the traditional immobilisers that rely on the key fob for ignition control. It is directly connected to the engine controller via the CAN bus. It is virtually impossible to disable, remove or hack. In addition to this, Ghost is tamper-proof, meaning that it is virtually impossible to disable or remove. Ghost system can be connected with an secure iPhone application that permits remote monitoring and management.
You can create an PIN that is simple to remember, yet mathematically, it is impossible to guess for thieves. The PIN can be customized and changed at any time and you can keep your car safe even when you park it on the street or in a parking lot. You can also select a valet or service mode if you need someone else to drive your vehicle for a short period for instance, when it is in the garage. This feature is also an excellent way to stop your car from being stolen by an unscrupulous mechanic. To give you more peace of mind, you can opt for a Ghost call alert to notify you if your car is moving or it's moved.
Convenience
The ghost immobiliser is an efficient security device, protecting your vehicle from typical methods of theft like key cloning and relay attacks. It works by connecting to the vehicle's data network CAN, and blocking communication with engine ECU. This makes it hard for thieves to hack or clone your vehicle.
Once installed, you will be required to enter a PIN number up to 20 digits using the buttons on your dashboard or steering wheel to start the engine. The system is completely concealed and thus unnoticeable to thieves. It does not emit radio frequency signals. It is also able to be set to an individual-changeable PIN code which adds security. The system is designed to avoid cutting the circuit, making it nearly impossible to tamper.
If you do happen to forget your PIN, there are systems that let you communicate with the immobiliser via an app on your smartphone to disarm it immediately. Some systems even have a service/valet setting that allows you to temporarily to start your car for instance, if you drop it off at a garage or valet park.
The Ghost Immobiliser is also undetectable to thieves as it doesn't transmit radio signals, a major advantage over other aftermarket car security systems. It is also easy to use and doesn't require complicated wiring. It can also be used in conjunction with a dash camera for additional security. This dash cam is the Thinkware F70, which features clear & sharp HD dashcam footage in 1080p HD and Format Free Technology and parking mode. Ghost 2 immobiliser is able to be hardwired to ensure maximum performance and durability.
Installation
If you're looking to secure your vehicle from theft, it's important to choose the right immobiliser ghost. This device can in preventing theft of your car by blocking communication between the engine controller unit (ECU) and key fobs. This prevents thieves from intercepting the signal and copying the key fob to begin your car. It also can detect when it has been tampered with and alert the owner of the vehicle.
The device is easy to install and integrates with the vehicle's existing systems. It does not require any modifications to wiring of the vehicle and can be positioned in a concealed location, like under the dashboard. To ensure that the device has been properly installed, follow instructions in the manual for the user. After installation, it's crucial to test the system. This will ensure that the immobiliser ghost is working exactly as it was intended to.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed in your vehicle. The installer will connect Ghost to your vehicle's CAN Bus system, making it harder for thieves to remove the system or bypass it. Installation typically takes between 2 and 3 hours.
During the installation process it is recommended that you consult the wiring diagram for the model of your vehicle. This will help you locate the CAN High and CAN Low wires that are required to connect the Ghost to your vehicle's engine. It is also crucial to double-check the connections to ensure that they are secure and insulated.
After ghost immobiliser reviews is completed, you can start using the Ghost Immobiliser as normal. It will disable the ignition of your vehicle if it is not started using the correct PIN code which you can assign yourself. The ghost cost of immobilisers can also be set to service/valet mode when you need to hand over your vehicle for servicing or valet parking.